Is your 2017 Nissan Rogue key fob acting up? Before you schedule a trip to the dealership, a dying key fob battery might be the culprit. This comprehensive guide will walk you through everything you need to know about your 2017 Nissan Rogue key fob battery, from identifying the signs of a low battery to replacing it yourself.
Signs Your 2017 Nissan Rogue Key Fob Battery Needs Replacing
Key fob batteries don’t last forever. Over time, they lose their charge, leading to various issues with your key fob’s functionality. Here are some common signs that your 2017 Nissan Rogue key fob battery needs replacing:
- Decreased signal range: You find yourself standing closer to your car than usual to lock or unlock it.
- Intermittent functionality: The key fob works sometimes but not others, even when standing close to the vehicle.
- Delayed response: There’s a noticeable lag between pressing a button on your key fob and the car responding.
- Warning lights and messages: Your Nissan Rogue’s dashboard might display warnings like “Key Fob Not Detected” or “Low Key Fob Battery.”
What Type of Battery Does a 2017 Nissan Rogue Key Fob Take?
Your 2017 Nissan Rogue key fob uses a CR2032 battery, a common type of lithium coin battery readily available at most electronic stores, auto parts stores, and online retailers.
How to Replace Your 2017 Nissan Rogue Key Fob Battery: A Step-by-Step Guide
Replacing your 2017 Nissan Rogue key fob battery is a quick and easy DIY task that can save you a trip to the dealership. Here’s a simple, step-by-step guide:
- Locate the key fob’s release button: On the back of your key fob, find the small release button.
- Release the mechanical key: Press the release button and gently slide the mechanical key out of the fob.
- Open the key fob casing: Using the tip of the mechanical key or a small flat-head screwdriver, carefully pry open the key fob casing at the designated notch.
- Remove the old battery: Gently remove the old CR2032 battery from its slot, noting the positive (+) side facing up.
- Install the new battery: Insert the new CR2032 battery into the slot, ensuring the positive (+) side faces up.
- Reassemble the key fob: Align the two halves of the key fob casing and press them firmly together until you hear a click, indicating they’re securely closed.
- Reinsert the mechanical key: Slide the mechanical key back into its slot on the key fob.
- Test the key fob: Check if all buttons on the key fob are functioning correctly by locking and unlocking your Nissan Rogue.
Important Tips for Key Fob Battery Replacement
- Handle the new battery with care: Avoid touching the flat surfaces of the new battery, as this can reduce its lifespan.
- Dispose of the old battery properly: CR2032 batteries contain lithium and should be disposed of according to your local regulations. Most electronic stores and some auto parts stores have battery recycling programs.
- Don’t wait for complete failure: If you notice any signs of a weak key fob battery, it’s best to replace it proactively.
By following these simple steps, you can replace your 2017 Nissan Rogue key fob battery yourself and avoid any inconvenience caused by a dead battery. If you’re uncomfortable performing this task yourself, your local dealership or a qualified automotive technician can assist you.
