“Vcds Coming Home” refers to a popular customization achievable with the VCDS software, allowing you to control your vehicle’s headlights for a personalized welcome. Imagine this: you park your car, lock it, and your headlights briefly illuminate your path, guiding you safely inside. That’s the magic of “coming home” lights, and with VCDS, you can activate and customize this feature on a wide range of Volkswagen, Audi, Seat, and Skoda vehicles.
Understanding VCDS and Coming Home Lights
Before we delve into the how-to, let’s break down what VCDS is and how it interacts with your car’s lighting system.
VCDS (Vag-Com Diagnostic System): This powerful diagnostic and customization software serves as a direct line of communication between your computer and your vehicle’s onboard computer. With VCDS, you can access and modify various settings, including those controlling the headlights.
Coming Home Lights: This feature, often referred to as “Follow Me Home” lights, offers both convenience and safety. When activated, the headlights remain on for a predetermined duration after you’ve parked and locked your car, illuminating your path.
vcds-software-interface|VCDS Software Interface|A close-up image of the VCDS software interface displayed on a laptop screen, highlighting the diagnostic and customization options available for vehicle lighting.
How to Enable Coming Home Lights with VCDS
Important Note: The specific steps might slightly vary depending on your vehicle’s model year and the VCDS software version. Always refer to the official VCDS documentation and your vehicle’s manual for the most accurate instructions.
Here’s a general guide to enable coming home lights:
-
Connect and Launch: Connect your VCDS interface to your vehicle’s OBD-II port and launch the VCDS software on your computer.
-
Select Control Module: Navigate to the “Select Control Module” section within VCDS and choose the module relevant to your vehicle’s lighting system (often labeled as “09-Central Electrics”).
-
Access Long Coding: Within the selected module, locate and access the “Long Coding” or “Coding” section.
-
Modify Byte: Depending on your car model, you’ll need to modify a specific byte within the long coding to activate the coming home lights feature. This often involves changing a value from “0” to “1” or selecting the desired activation method (e.g., flashing high beams, activating fog lights).
-
Save and Exit: Once you’ve made the necessary changes, save the coding and exit VCDS. Test your newly activated coming home lights!
car-obd-port-connection|Car OBD Port Connection|A clear image of a hand connecting the VCDS interface cable to the OBD-II port located under the dashboard of a car.
