A dead key fob battery can be a real nuisance, leaving you stranded and unable to access your Chrysler 200. Fortunately, replacing the battery is a quick and easy fix that you can do yourself. This comprehensive guide will walk you through everything you need to know about your Chrysler 200 key fob battery, from identifying the symptoms of a dying battery to replacing it yourself.
Recognizing a Dying Key Fob Battery
Before you start digging around for a new battery, it’s essential to make sure that the battery is actually the culprit. Here are a few telltale signs that your Chrysler 200 key fob battery might be on its last legs:
- Decreased Signal Range: You find yourself having to stand closer to your car for the key fob to work.
- Intermittent Functioning: The key fob works sporadically, sometimes unlocking the car and sometimes not.
- No Response: The key fob fails to respond entirely, even when you’re standing right next to the car.
- Dashboard Warning Light: Some Chrysler 200 models display a warning light on the dashboard when the key fob battery is low.
If you’re experiencing any of these issues, it’s highly likely that your key fob battery needs replacing.
What Battery Does My Chrysler 200 Key Fob Take?
Most Chrysler 200 key fobs use a CR2032 battery, a common type of lithium coin battery. You can find them at most supermarkets, drugstores, and electronics stores.
How to Change a Chrysler 200 Key Fob Battery: A Step-by-Step Guide
Replacing the battery in your Chrysler 200 key fob is a straightforward process. Here’s a step-by-step guide:
- Locate the Battery Compartment: Look for a small release button or notch on the back of your key fob.
- Open the Key Fob: Press the release button or use a small flathead screwdriver to gently pry open the key fob.
- Remove the Old Battery: Carefully remove the old battery from the compartment. Pay attention to its orientation.
- Insert the New Battery: Place the new CR2032 battery into the compartment, making sure the positive (+) side faces up.
- Reassemble the Key Fob: Align the two halves of the key fob and press them firmly together until they snap shut.
- Test the Key Fob: Try locking and unlocking your car with the key fob to ensure the new battery is working correctly.
What if My Key Fob Still Doesn’t Work?
If you’ve replaced the battery and your Chrysler 200 key fob still isn’t working, there might be other issues at play, such as:
- Key Fob Programming Issues: The key fob may need to be reprogrammed to your car.
- Faulty Key Fob: There could be internal damage to the key fob itself.
- Car Battery Issues: In rare cases, a weak car battery might prevent the key fob from working properly.
If you suspect any of these issues, it’s best to consult a qualified automotive locksmith or your Chrysler dealership for further assistance.
Tips for Extending Key Fob Battery Life
- Avoid Extreme Temperatures: Prolonged exposure to very hot or cold temperatures can shorten battery life.
- Keep it Dry: Moisture can damage the key fob’s internal components, including the battery.
- Don’t Panic-Press: Repeatedly pressing the buttons when the car is out of range won’t help and will only drain the battery faster.
Frequently Asked Questions (FAQs)
Q: How long does a Chrysler 200 key fob battery last?
A: The battery in a Chrysler 200 key fob typically lasts between 3 to 5 years, depending on usage and environmental factors.
Q: Can I drive my Chrysler 200 with a dead key fob battery?
A: Yes, but you’ll need to use the physical key to unlock the car and potentially start the engine.
Q: Can I replace the Chrysler 200 key fob battery myself?
A: Absolutely! It’s a simple process that most people can do at home with a few simple tools.
Q: Where can I get my Chrysler 200 key fob reprogrammed?
A: You can have your key fob reprogrammed at a Chrysler dealership or by a qualified automotive locksmith.
Q: How much does it cost to replace a Chrysler 200 key fob battery?
A: A CR2032 battery costs just a few dollars. If you go to a dealership or locksmith for the replacement, they may charge a small labor fee.
key fob battery 2015 chrysler 200
Conclusion
Dealing with a dead Chrysler 200 key fob battery can be frustrating, but as we’ve highlighted, replacing the battery is a quick and easy fix. By following the steps outlined in this guide, you can get your key fob working again in no time. Remember to keep an eye out for the signs of a dying battery and be prepared with a spare CR2032 battery to avoid any unexpected lockouts.
