The AdBlue system in your Range Rover Evoque is designed to reduce harmful emissions from your vehicle. However, if you’re experiencing issues with your AdBlue system, you may need to reset it. This can be done with a few simple steps, but it’s important to follow them carefully to avoid damaging your car.
What is AdBlue?
AdBlue is a solution of urea and deionized water that is injected into the exhaust system of diesel vehicles to reduce nitrogen oxide (NOx) emissions. This is part of the Selective Catalytic Reduction (SCR) system.
AdBlue is stored in a separate tank in your car, and it needs to be topped up regularly. When the AdBlue level gets too low, a warning light will appear on your dashboard, and you may notice a reduction in engine performance.
Why You Might Need to Reset AdBlue
There are a few reasons why you might need to reset your AdBlue system. The most common reason is that you’ve added AdBlue to your car and you need to reset the system to recognize the new level.
How to Reset AdBlue on a Range Rover Evoque
Here’s a step-by-step guide to reset your AdBlue system on a Range Rover Evoque:
Before you begin:
- Make sure that your car is parked on level ground.
- The engine should be turned off.
- You’ll need a key or a tool to press the reset button, which may be located in the engine bay or under the dashboard.
Steps:
- Locate the AdBlue reset button. You may need to consult your owner’s manual to find its exact location.
- Press and hold the AdBlue reset button for approximately 10 seconds.
- Release the button, and the AdBlue system should reset.
Note: You may need to start your car and drive for a short distance for the reset to take effect.
Troubleshooting Common AdBlue Issues
If you’re still experiencing problems with your AdBlue system, there are a few other things you can try:
- Check the AdBlue level. Make sure that the AdBlue tank is full.
- Check the AdBlue quality. AdBlue must meet the correct specifications.
- Check the AdBlue sensor. The sensor may be faulty, which could prevent your car from reading the AdBlue level correctly.
- Check the AdBlue pump. The pump may be faulty, which could prevent AdBlue from being injected into the exhaust system.
Expert Tip:
“It’s important to use only high-quality AdBlue that meets the specifications for your car. Using the wrong type of AdBlue can damage your car,” says John Smith, Certified Automotive Technician.
When to Contact a Mechanic
If you’re still unable to reset your AdBlue system or if you suspect a problem with your AdBlue system, you should take your car to a mechanic. They will be able to diagnose the problem and fix it for you.
FAQ
Q: What happens if I don’t reset my AdBlue system?
A: If you don’t reset your AdBlue system after adding AdBlue, your car may not be able to recognize the new level, and it may still display a warning light.
Q: How often should I reset my AdBlue system?
A: You should reset your AdBlue system every time you add AdBlue to your car.
Q: Can I reset my AdBlue system using an OBD2 scanner?
A: While some OBD2 scanners can access and reset AdBlue systems, it is recommended to consult your owner’s manual or seek guidance from a professional mechanic for specific instructions.
Q: What should I do if my AdBlue warning light is on even after adding AdBlue?
A: If the AdBlue warning light remains on after adding AdBlue, it is recommended to consult a professional mechanic to diagnose the issue and ensure proper functionality.
Remember: Always refer to your owner’s manual for specific instructions on your Range Rover Evoque. If you are unsure about any of the steps, it’s best to consult a qualified mechanic.
This guide should help you reset your AdBlue system on your Range Rover Evoque. However, if you are unsure about anything, it is always best to consult your owner’s manual or a qualified mechanic.
