Changing the battery in your Subaru key fob is a quick and easy process that can save you time and money. Knowing how to do this yourself prevents the inconvenience of a dead key fob and avoids a trip to the dealership. This guide will walk you through the steps involved in replacing the battery in your Subaru key fob, regardless of your Subaru model.
Locating the Right Battery for Your Subaru Key Fob
The first step in changing your Subaru key fob battery is identifying the correct replacement. Most Subaru key fobs use a CR2032 3V lithium battery. You can readily find these batteries at most electronics stores, pharmacies, and online retailers. While a CR2032 is the most common, it’s always a good idea to double-check your owner’s manual for the specific battery type recommended for your Subaru model year. bmw brake pad warning light Using the wrong battery type could potentially damage your key fob.
Gathering Your Tools
You’ll need minimal tools for this task. A small flathead screwdriver or a similar thin, sturdy tool is all that’s required to pry open the key fob casing. Some key fobs may have a small notch or slot specifically designed for this purpose. You might also want a soft cloth or surface to protect your key fob from scratches during the process.
Step-by-Step Guide to Changing the Battery
Here’s a detailed, step-by-step guide to help you change the battery in your Subaru key fob:
- Locate the Key Release: On your Subaru key fob, there’s a small button or switch that releases the physical key. Press this button and slide the key out of the fob. brake pad warning light on bmw 3 series
- Open the Key Fob: Use your flathead screwdriver (or similar tool) to carefully pry open the key fob casing. Start by inserting the screwdriver into the notch or seam where the two halves of the fob meet. Apply gentle pressure and pry the casing apart. Avoid using excessive force, which could damage the fob.
- Remove the Old Battery: Once the key fob is open, you’ll see the old battery. Gently pry the old battery out of its compartment. You can use your screwdriver or even your fingernail for this.
- Install the New Battery: Place the new CR2032 battery into the compartment, ensuring the positive (+) side faces upwards, just like the old battery. Press down lightly until it snaps into place.
- Reassemble the Key Fob: Align the two halves of the key fob casing and press them together until they click shut. bmw anti-lock brake warning light coming on after tire change
- Test the Key Fob: Insert the physical key back into the fob and test all the buttons to ensure they are working correctly.
Troubleshooting
If your key fob still isn’t working after replacing the battery, try these steps:
- Check the Battery Orientation: Ensure the new battery is installed correctly with the positive (+) side facing up.
- Clean the Contacts: Use a cotton swab and rubbing alcohol to clean the battery contacts inside the key fob.
- Try a Different Battery: The new battery might be faulty. Try installing a different CR2032 battery.
- Consult Your Dealer: If none of these steps work, it might be a problem with the key fob itself. Contact your Subaru dealer for further assistance. 2011 bmw x5 brake pad warning reset
Conclusion
Changing the battery in your Subaru key fob is a simple task that you can do at home in just a few minutes. This guide provides you with the knowledge and steps to perform this task quickly and efficiently, saving you time and money. Remember to always refer to your owner’s manual for the specific battery type recommended for your Subaru model and don’t hesitate to contact your dealer if you encounter any problems. brake warning light bmw 1 series Now you’re prepared to tackle this common car maintenance task with confidence!
