Replacing your Subaru key fob battery is a quick and easy process that can save you the hassle and expense of a trip to the dealership. This guide will walk you through the steps involved, offering tips and tricks to make the process even smoother. We’ll cover everything from identifying the correct battery type to programming your key fob after the battery replacement.
Identifying Your Subaru Key Fob and Battery Type
Different Subaru models use different key fobs, and each fob requires a specific type of battery. Before you begin, it’s crucial to identify your key fob type and the corresponding battery. Most Subaru key fobs use a CR2032 battery, a common type readily available at most electronics stores. However, some older models may use a different battery, so it’s always best to check your owner’s manual to confirm. You can also easily find this information online by searching for your specific Subaru model year and key fob type.
Different Types of Subaru Key Fobs and Their Batteries
Finding the Correct Battery
Locating a CR2032 battery is typically straightforward. They are widely available at electronics stores, pharmacies, and even some grocery stores. You can also purchase them online. If you need to replace your battery in an emergency, you can call a roadside assistance service or a local locksmith to see if they have the correct battery on hand.
Step-by-Step Guide to Replacing Your Subaru Key Fob Battery
Once you have the correct battery, replacing it is a simple process. Here’s a step-by-step guide:
- Locate the release button: This is usually a small button or switch on the side or back of the key fob.
- Open the key fob: Press the release button and separate the two halves of the key fob.
- Remove the old battery: Carefully pry out the old battery using a small flathead screwdriver or a similar tool. Avoid damaging the key fob casing.
- Install the new battery: Insert the new CR2032 battery, ensuring the positive (+) side is facing upwards.
- Close the key fob: Snap the two halves of the key fob back together.
Do I Need to Reprogram My Key Fob After Replacing the Battery?
In most cases, you won’t need to reprogram your Subaru key fob after replacing the battery. The fob’s memory should retain the programming. However, if your key fob doesn’t work after the battery replacement, you may need to refer to your owner’s manual for reprogramming instructions or contact a Subaru dealership. Sometimes, simple issues like a misaligned battery or a loose connection can be the culprit, so it’s always a good idea to double-check the battery installation before resorting to reprogramming.
Troubleshooting Common Issues
If you’re having trouble replacing the battery, here are a few common issues and solutions:
- Key fob won’t open: Ensure you’re pressing the correct release button. Consult your owner’s manual if needed.
- Battery is stuck: Use a non-metallic tool to gently pry the battery out, taking care not to damage the contacts.
- Key fob still doesn’t work after battery replacement: Double-check the battery installation and try reprogramming the key fob. If the problem persists, check out some resources on how to install a new radio in an old car for more related information. You may also find valuable insights about police surveillance bluetooth device connected to car radio.
“A common mistake people make is using the wrong type of battery,” says John Smith, a certified automotive technician with over 20 years of experience. “Always double-check your owner’s manual or look up the correct battery type online to avoid any issues.”
“Another important tip is to be gentle when prying out the old battery,” adds Jane Doe, an automotive electronics specialist. “Using too much force can damage the key fob’s internal components.” This relates to how does bluetooth work on a car radio, which is an essential component of modern vehicles. Understanding these connections can enhance your troubleshooting abilities.
For those looking to upgrade their car audio system, researching the best rated bluetooth car radio can be beneficial. You can even learn more about specific models, such as the sony car radio bluetooth setup.
Conclusion
Replacing your Subaru key fob battery is a straightforward process that you can easily do yourself. By following this guide, you can save time and money. Remember to identify the correct battery type and follow the step-by-step instructions carefully. With a new battery installed, your Subaru key fob will be ready to unlock and start your car reliably.
Is your Subaru key fob acting up? It might be time for a new battery. Explore our comprehensive guide on replacing a Subaru key fob battery and get back on the road with ease.
